admin

Februar 5, 2021

Why Coupling Grease?
Adequate lubrication is essential for satisfactory gear coupling operation. Gear Coupling Grease is exclusively developed for gear coupling applications to increase coupling daily life while drastically cutting down servicing time. Its large viscosity base oil and tackifier combine to maintain the grease in location and avert separation and it is actually in full compliance with NSI/AGMA 9001-B97 lubrication suggestions.
Coupling Grease is dark brown in colour and produced having a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to substantial centrifugal forces ordinarily observed in couplings. Bearing or general purpose greases are inclined to separate and reduce effectiveness as a result of large centrifugal forces within the several substances at high rotational speeds. These higher centrifugal forces encountered in couplings separate the base oil in the thickeners. Hefty thickeners, which have no lubrication attributes, accumulate from the gear tooth mesh region leading to premature coupling failure. Gear Coupling Grease is built to very resistant to centrifugal separation with the oil and thickener, which makes it possible for the lubricant to become used for a fairly long period of time.
One of the techniques to the good results of Gear Coupling Grease is definitely the variable consistency through the entire working cycle from the application. The consistency of our gear coupling grease modifications with the working disorders. Functioning in the lubricant under actual services conditions causes the grease to grow to be semi-fluid, functionally solash lubricating the put on surfaces of the coupling. As the grease cools, it returns to the unique consistency, thereby avoiding leakage.
Gear Coupling Grease is obtainable from stock in 14 oz. cartridges, 1 lb. and five lb. cans.
Attributes
Minimizing of coupling dress in
Resistance to water washing
Corrosion and rust protection
Large load carrying capabilities
Extended relubrication frequency
Use at temperatures up to 325° F
Staying in place below higher speeds
Resistance to centrifugal separation
Reduction in down time & servicing cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and 1. This grease is specially formulated that has a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.