900 SERIES PINTLE CHAINS, sometimes referred to as "sugar mill" or "intermediate carrier chain" can be used extensively in sugar mills. Multiple strands of 900 Pintle Chain, available with one or two holes per link, can be installed with overlapping beaded carrier slats to form a continuous apron conveyor for intermediate carrier program.
The pin holes at the closed end of the 900 Class hyperlink are provided with smooth bushings which are press-fitted in to the links and keyed into place. The bushings are renewable and can be driven out and replaced if they become worn. 900 Class Pintle Chain was created with dual barrels, one on each 
aspect of the open up end of the links, to support double sprockets. The purpose of this driving technique is to eliminate the possibility of materials build-up in the sprocket contact area, which frequently causes the chain to jump the sprocket. Large ribs rigidly reinforce these traveling barrels.
Our 900 Course chain links, with tensile power from 22,500 to 32,500 pounds, can be found with large sliding areas to lessen chain wear and prolong chain life. Broad wearing surfaces and weighty cross sections synergy to provide a considerable link which is manufactured according to manufacturer's requirements and may perfectly replace links created by other manufacturers.
Brutaloy sprockets for 900 Class Pintle Chain are Drive Chain plentiful in 3.170 inches. 900 Class Pintle Chain should only be permitted to travel in a single direction; links should always run in the direction of their closed narrow end.
Obtainable in cottered construction just, 900 Class Chain is definitely assembled with T-headed pins which are locked into place by two lugs cast upon the ends of the traveling barrels to prevent pin rotation. Pin rotation during operation would lead to wear within the bushing. Both the head of the pin and the cottered end of the pin are shielded by cast lugs on the barrel end of the links.
Material
900 Class Pintle Chain are links cast of malleable iron or Promal (Duramal). It really is furnished with carbon metal warmth treated pins and carbon metal case hardened bushings as standard. However, stainless steel pins and bushings can be provided when specified.
