undercarriage parts for CZPT komats CAT
We are suppliers and manufacturer for Komatu,shantui and CZPT parts in china
1. Excavator Parts:PC60, PC200, PC210, PC220, PC270, PC300, PC360, PC400, PC650,
PC750, PC850, PC1250
2. Loader Parts :WA320/WA380/WA420/WA460
3.Dozer Parts:D31, D41, D50, D60, D65, D80, D85, D155, D355, D375, D475
4.All models CZPT bulldozer from 80hp-520hp: CZPT SD13 SD16 SD22 SD23 SD32 TY160 TY220 TY230 TY320 bulldozer parts,etc
All CZPT excavator: CZPT SE60 SE130 SE210 SE220 SE240 SE330 SE360 excavator parts.
All CZPT Road roller: SR12 SR14 SR16 SR18 SR20 SR22 SR26 road roller parts.
All CZPT Motor grader : Shantui SG16 SG18 SG21 CZPT Motor grader parts.
All CZPT wheel loader: CZPT SL20W SL30W SL50W SL60W CZPT wheel loader parts.
5.CZPT Engine: 4B/4BT/6BT/NTA855/KTA13/KTA38/QSK19/QSK23/QSK45/QSK60 etc
6.CAT Excavtor:CAT320C/325C/330C/345C/320D/323D/324D/330D etc
7. CAT dozer: D5B, D5C, D5G, D6C, D6D, D6G, D6M, D6N, D6K, D6H, D6R, D7G, D7F, D7R, D7N,
D8N, D8L, D8R, D8K, D8T, D9G, D9H, D9N, D9R .D10R, D9T, D10T, D11T, D11R, D11 series
7.CZPT Excavator: EC210B/240B/290B/360B/460B etc
8.Other: CZPT forklift parts , CZPT parts
14X-30-13512 CYLINDER D65 D85
14X-30-13510 CYLINDER D65 D85
14X-30-13115 CYLINDER D60 D65 D85
14X-30-13114 CYLINDER D60 D65 D85
0571 7-09040 BUSHING D65 D85
14Z-30-31111 SPRING D60 D65 D85
207-30-54141 SPRING D60 D65 D85 PC250 PC300 PC340 PC350
207-30-54140 SPRING BR550 CD110 D60 D65 D70 D85 PC250 PC300 PC340 PC350
14X-30-13530 CABIN D65 D85
14Y-30-11374 CABIN D60 D65 D85
14X-30-13310 NUT D31 D37 D39 D61 D65 D85
0571 7-08040 BUSHING D85 532 CS210 D135 D155 D275 D40 D41 D65 PC220 WA300 WA320
195-50-22860 SEAL D375 D60 D61 D65 D68 D85
14X-30-13241 SPACER D61 D85 D63 D65 D68 D85
14X-30-13240 SPACER D60 D65 D85
203-30-42260 VALVE D37 D31 CL60 D40 D41 PC60 PC80 PC150 D20 D21 D31
5711-00900 FITTING PC450 PC650 WA WA120 WA180 WA700 WA800 WA900
14X-30-13174 PLATE PC130 D39 PC45 PC18 PC130 PC88
57110-8 0571 BOLT D355
01643-30823 WASHER 3D84 3D95
14X-30-13164 HOLDER D65 D85
207-30-54160 SEAL PC300 PC310
135-30-14620 COVER D65 D85
57110-81571 BOLT WA740 SA12
01643-31032 WASHER WA380 WA470 WA480
0571 0-11018 BOLT PC290 SAA6D PC220
57110-81235 BOLT PC450 SA6D SA12V WA700 WA800 WA900
01643-31232 WASHER PC450 WA470 PC300 PC650 WA120 WA380 WA500
14X-30-13143 PISTON D60 D65 D85
150-30-13442 PACKING D65 D85
150-30-13480 RING D65 D85
150-30-13460 RING,SNAP D65 D85
150-30-13430 RING D75 D80 D85
14X-30-13124 YOKE D60 D65 D85
195-30-14151 WASHER D65 D85
195-30-14160 PLATE D65 D85 D355
57110-82460 BOLT GD825 GH320 HD785
57110-82070 BOLT PC220 PC240 PC290 D65 D275
01643-32060 WASHER PC450 PC650 WA380 WA500 WA600
101-27-11161 NUT D20
101-27-21140 NUT D20 D21
103-15-12820 SEAL RING D65
103-15-29210 SEAL RING D85 D175 D225
103-22-21111 DRUM D20 D21
103-22-21130 DRUM D20 D21
103-22-22111 FLANGE D20 D21
103-22-31110 DRUM D20 D21
103-22-31120 FLANGE D20 D21
103-22-31131/31130 DRUM D20-6 D20
103-22-31132 DRUM D20 D21
|Model:||D50 D53 D58|
What Is a Shaft Collar?
A shaft collar is a simple machine component, but its function is important in many power transmission applications. Most commonly, shaft collars are used in motors and gearboxes. They can act as locating components, bearing faces, and mechanical stops. Their compact design makes them easy to install. In addition, they provide a clean, simple look for your gearbox or motor.
There are a variety of sizes of shaft collars. Each type has different parameters and requirements. These specifications can be found on the manufacturer’s website. These dimensions are important for the selection process. In order to determine which size is best for your needs, first identify the system parameters and limitations that you’ll be using.
Shaft collars are available in a variety of sizes and materials. These pieces can range in thickness from just a few millimeters to several inches. A solid steel shaft collar is usually available from 1/8″ to six inches. The material used for shaft collars is either 304 stainless steel or lead-free steel.
The oldest style of shaft collar is the set collar, which uses a hardened set screw to penetrate the shaft surface. It is ideal for holding bearings, spacers, and sprocket hubs. These collars are typically installed using hex keys, which are six-sided L-shaped tools, also known as Allen Wrenches. These collars are useful for many different machine applications, and are often used in conjunction with springs and dampers to hold components in place. They are also useful as mechanical stops, stroke limiters, and bearing holders.
Shaft collars come in one-piece and two-piece designs. A one-piece collar provides uniform holding force on the shaft, whereas a two-piece shaft collar is stronger and can be assembled anywhere on the shaft. Shaft collars are generally available in English and metric units, and the manufacturer can alter the dimensions of any standard collar to meet your needs. For more unique situations, you can also choose a fully customized shaft collar that is specific to your application.
A shaft collar is a metal or plastic device used to locate and position components on a shaft. It also limits the movement of the shaft. These devices can be found on a wide variety of applications, including motor assembly components. There are many types of shaft collars. To help you find the right shaft collar for your application, you can use Thomas Supplier Discovery Platform. The platform has over 70,000 product categories to help you find the right solution.
Clamp-type collars are reliable under constant loads, but may require additional support under shock loads. A shock load is a force generated by a relatively small mass that is rapidly increased by impact. Clamp-style collars are designed to counteract this force, and an undercut on the shaft may help them stay firmly in place. Clamp-style collars are also available in two-piece designs, which offer a high holding force and ease of assembly.
A shaft collar is an important machine component. It holds and positions sprockets on a shaft. It also acts as a mechanical stop, and helps prevent a shaft from slipping. They can also be used to limit the movement of cylinders and actuators. These simple components are found in virtually every type of machinery.
The torque-generating force in a set-screw shaft collar is absorbed by friction between the threads and the clamp body. The friction between these parts helps compensate for the lost torsioning effort, which can lead to the collar failing to hold. Alternatively, a torque wrench can help control the final torque of the shaft collar.
There are many different types of shaft collars available for different applications. It is important to understand the characteristics of each to find the right one for your application. The most common shaft collars are made from steel or aluminum, but some are also made of plastic. These are relatively inexpensive and lightweight, but their holding power is limited. Titanium shaft collars are much lighter than aluminum and are resistant to extreme temperatures, but they are only used in a few specific applications.
Another type is a clamp collar, which is mounted using a compression method. Compared to the set screw type, clamp collars are much stronger and have a higher holding power. Clamp collars come in either a one-piece or two-piece design. One-piece collars are used in applications where the shaft is split and requires a positive stop.
The strength of a shaft collar depends on the type of screw used to attach it to the shaft. The screw’s strength and diameter will affect the holding power of the shaft collar. In most cases, a manufacturer will offer the proper screw with the collar. In some cases, however, a non-standard screw may be more appropriate.
The set screw collar is one of the oldest types. Its disadvantage is that it can be difficult to move and may damage the shaft. Also, it is not as secure as a clamp-based collar. In addition, two-piece hinged shaft collars are the most convenient. One-piece collars are difficult to move, while two-piece collars can be moved easily along the shaft without separating components.
Shaft collars are a complex component and their dimensions are crucial to the performance of the application. Designing a shaft collar requires consideration of a variety of factors, such as the type of material, bore size and geometry of the shaft. The manufacturer of a shaft collar will usually publish performance data on its website, or users can contact them for assistance.
The material used in shaft collars has a significant impact on the collar’s strength and its holding capacity. Shaft collars should be made from a high-quality, corrosion-resistant material. The strength of the screw also plays an important role in the collar’s holding capacity. Generally, a collar’s manufacturer will provide the appropriate type of screw for the application. However, in some cases, a non-standard screw may be necessary.
Shaft collars are available in a variety of styles. One-piece collars are often used in applications where there is minimal or no disassembly or adjustment required. Alternatively, two-piece collars may be used when frequent disassembly is needed. Regardless of the style, the size of shaft collars should be consistent with the requirements of the assembly.
Shaft collars are made from steel or aluminum. They offer good holding power and are lightweight. Steel shaft collars are durable and have good corrosion resistance. However, the grade of steel can affect their performance. Stainless steel collars are easier to machine and have improved corrosion resistance. However, they may reduce the holding power.
A stainless steel shaft collar is a simple mechanical component used to secure a shaft. It is used for many different applications, most commonly in motors and gearboxes. They also function as locating components, mechanical stops, and bearing faces. These collars are available in different sizes and can be used for a variety of different purposes.
Shaft collars come in various materials, including stainless steel, aluminum, and polyamide. They are available with a variety of different finishes, including electroless nickel plating. Stainless steel shaft collars are available in various diameters, including 5/16 in. through 5/8 in. They are also available in single and double split styles.
CZPT offers a full line of stainless steel shaft collars in both 303 and 316 stainless steel. These collars are resistant to corrosion caused by water and a wide variety of commercial-grade cleaning agents. They are also supplied with fastening hardware of similar material. For added durability, CZPT shaft collars are also available in engineered plastic.
Stainless steel shaft collars can be easily adjusted for the proper torque. They come in various sizes and are easy to install and remove. They can also be re-bored if necessary. One type of shaft collar is quick-clamp, which is equipped with a clamping lever and a handle. It’s ideal for frequent setup and adjustment.
Quick-clamp shaft collars
Quick-clamp shaft collars are a simple and convenient way to secure a shaft. They have a flush handle that sits flush with the outside diameter of the shaft and can be easily adjusted by hand. They are made from lightweight aluminum and stainless steel hardware that does not mar the shaft.
These shaft collars replace standard hardware and are easy to install and remove. Quick-clamp shaft collars are available in one, two, and three-piece clamping styles. Some quick-clamp shaft collars have an integrated hinge and countersunk mounting holes for easy mounting. They can also have a knurled nut for easier locating.
Quick-clamp shaft collars are a convenient option for many types of packaging machinery. They can be installed and adjusted with no tools, making them an efficient choice for frequent changeovers and setups. CZPT offers two types of quick-clamp shaft collars. The first type has a cam lever that sits flush with the outside diameter and is finger operated. The second type has an adjustable tension-adjustment screw for easy adjustment. Both designs are ideal for low-rpm applications where frequent changeovers are needed.
Quick-clamp shaft collars are made of black anodized aluminum and steel fasteners. These shaft collars are available in sizes ranging from 0-300mm and in various designs. A quick-clamp shaft collar has a high load-bearing capacity, and a high torque capacity. Axial load capacities and torque specifications are non-binding guidance values and do not represent a warranty or guarantee of their characteristics.
editor by CX 2023-05-06