Helical-worm gearmotors
Due to their style and from being coupled with a helical equipment stage, the helical-worm gearmotors S..DR.. have particularly high efficiency. Also, they are extremely low-noise and thus avoid high sound emission levels.
Low-noise continuous operation: gear unit combination optimized with respect to efficiency
Do you expect a drive answer to impress you using its high level of performance and efficiency? In that case, we would recommend our high-quality helical-worm gearmotors EP to you. These could be implemented separately in the modular system. In this way, they offer you a massive range of sizes, gear ratios and 
engine sizes.
However, their greatest power is usually their running smoothness and their incredibly low noise development. A very important factor is for certain - With the helical-worm gearmotors EP you opting for a robust drive solution that you will hardly also hear.
The overall concept offers you many more practical product characteristics and benefits. Included in these are the significantly higher performance of the helical-worm combinations as opposed to single helical-worm gear systems. This is one way you save extra energy in the operation of your systems and so are able to noticeably reduce ongoing operating costs.
You will receive the low-noise helical-worm gearmotors EP. - to fit your individual requirements - with an array of AC motors. Furthermore, you can freely configure all of the relevant properties. In this way, you can effectively utilize all the benefits provided by this mixture of low-noise helical-worm equipment unit and performance-optimized motor. Even greater variance can be achieved because of the optional flange or foot-mounted design and by selecting between solid and helical worm gear motor hollow shaft.
Save time and money
By opting for among our gearmotors, you already are saving time and money with this selection and task planning. The reason being our modular system allows a multitude of combination options for gear units and motors. You can as a result reduce operating costs, count on a long service life and reap the benefits of simplified maintenance that is feature of our brand.
Helical-worm gear units
Helical-worm combinations with significantly better efficiency than single helical-worm gear units
Very low-noise operation
Available variants:
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Ever-Power
More on helical-worm gear units of series EP
AC motors
Combine the helical-worm gear unit with this AC motors:
Characteristics
Quiet and reliable transmission of torque
High overload capacity
Hardened steel worm equipment and bronze alloy worm wheel provide exceptional toughness and long service life.
Optional heavy duty bearings deliver high radial and axial load capacity
High strength cast iron casing (SK02050 - SK43125)
Lightweight, corrosion-resistant light weight aluminum alloy housing (SK02040.1)
Application Specific Solutions
Fields of use
Intralogistics
Material handling
Presses
Version
Solid and Hollow shaft (keyed, shrink disc ) Designs
Obtainable in footed, shaft mount or flange mounted configurations
Right Angled gear units
Your advantages
Economical operation
Low noise
High permitted overhung loads
Helical-worm Gearmotor S Series
S series
Ever-Power helical-worm gear models are helical/helical-worm combinations, so they are more efficient than normal helical-worm gear units. Due to their outstanding efficiency, these drives can be utilized in every industrial sector and customized to individual torque and swiftness requirements. The reduction ratios afforded by the helical-worm gear stage and the low noise levels during operation make these gearmotors ideal low-cost solutions for basic applications.
Available versions:
Foot-mounted or flange-mounted
B5 or B14 Flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disc, splined hollow shaft
Helical worm geared motors
Tough, compact, eye-catching!
Due to the unique mixture of optimized worm wheel material with unique lubricants, optimized shape, this powerful engine achieves high levels of efficiency and torque. The housing machined on all sides allows diverse mounting options. Double chamber shaft seals are used as standard.
The low contour design helps it be suitable for implementing applications e.g. in the meals industry. The housing does not have any recesses, which simplifies cleaning - a particularly important feature for areas with stringent hygiene requirements.
Technical Data
Number of sizes:6
Power Range:0.12 - 7.5kW
Output torque range:50 - 1,300Nm
Ratio:3 - 3,400
Output option:output shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm, foot
Course 12 Helical and hardened and ground worm gears: Provides higher efficiencies and greater torque capacity in smaller sizes.
Multiple Input Options: Integral gear motors, in . or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Choices: Hollow bores and shrink disks for shaft mounting, inch and metric result shafts, installation pilots and flanges provide a wide range of design solutions.
UNIBLOCK Housing: For maximum rigidity universal mounting on five sides or with a torque arm.
Sealed for Washdown: Continues contaminants and water away.
Worldwide Motor: Multiple leads and windings for worldwide multi volt/Hz requirements in addition modular design to simply accept brakes, encoders or forced cooling.
EP equipment motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right position worm geared motors established new requirements for reliability, effectiveness and economic climate with unparalleled features which includes hollow shafts in the tiniest sizes. An inverter friendly design provides for easy integration right now and a really future proof solution. The EP gear motor offers total flexibility in mounting choices includes shaft, base, encounter, and flange solutions. The engine terminal box could be mounted in alternative positions rotated in 90º steps around the motor frame offering for unparalleled integration options.
EP gear motors comply with UNITED STATES and International requirements, including NEMA, IEC, CSA, and CE, the EP series allows for worldwide acceptance, a genuine total alternative for our global customers.
Excellent protection of IP65 acc. to IEC 529 assures you that the EP series is usually dust tight and hose evidence,and can be used outdoors or in wet and dusty conditions without the use of additional enclosures. Complete rated output is available at the output shaft of the machine.
Product Features
Power rating up to 5,5 kW.
Torque 25 ... 1.000 Nm
Output Speeds 0,2 ... 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change 1st after 15000 hrs
Low noise gearing
Mains connection 110 ... 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Connection Regular with CAGE CLAMP®
Additional features:
Connecting with Plug connectors.
With built-in inverter up to 7,5kW.
EP-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
Due to the unique combination of optimized worm wheel materials with special lubricants and optimized form, this powerful geared motor achieves high levels of effectiveness and torque. The reduced contour design makes it ideal for implementing applications e.g. in the food industry. The housing has no recesses, which simplifies cleaning - a particularly important feature for areas with stringent hygiene requirements.
Nominal torque: 50 - 1300 Nm
Rated power: 0.12 - 7.5 kW
Ratio: 3 - 3400
The 800BR contains a wide selection of compact, durable helical gear drives with extended life performance features and simplified maintenance. The usage of state of the artwork helical and worm equipment combinations affords optimum performance fulfilling a wide variety of ratio requirements. The 800 BR is definitely functionally interchangeable with many major manufacturer’s drives.
SPECIFICATIONS
Dual and triple reduction ratios from 8:1 to 900:1,
4 case sizes - 830, 840, 850, 860
All systems shipped pre-lubed for your unique mounting position with KluberSYNTH UH1 6-460
Obtainable in NEMA C-face flanged and direct input
Projecting and hollow output shafts
Available accessories
Output flange kits
Torque arm kits
Base kits
Output shaft kits
Product Features
Available in nontoxic white-colored (BK) and stainless epoxy finish (SBK)
Obtainable in hollow or projecting output shafts
Dual and triple reduction ratios
Flanged or foot mounted
All products adaptable to floor, sidewall or ceiling mounting
Helical worm geared motor
0,12 - 5,5 kW
4 - 996 Nm / 6 - 316 rpm
Stober MGS S helical worm geared motor
Efficient small right-angle geared engine. A favorably priced choice for the standard jobs expected of a right-angle drive.
5 equipment sizes (S0 to S4).
Motor power 0.12 to 5.5 kW.
Rated torque of 23 to 800 Nm.
Gear ratios from i = 6 to 680.
Backlash smaller than 20 arcmin.
Modular, torsionally stiff , leak-proof design.
Helical worm geared motors offered with:
Solid shaft with keyway.
Hollow shaft with keyway, optional with cover.
Hollow shaft with shrink disk, optional with cover.
Gear unit and AC electric motor are directly flange mounted, the pinion is on the engine shaft. This integrated compact design can be an essential aspect for the high precision and the extraordinary stiffness of EP geared motors.
For vector-controlled inverter procedure use of an incremental encoder is provided for as regular.
Worm gearboxes and helical worm gearboxes / geared motors (S and SS)
The degree of efficiency in Ever-Power high performance worm gearboxes and helical worm gearboxes is more than 90%. All worm shafts are manufactured from case hardened alloy metal and the flanks are precision ground. The worm wheels are made from special wear-resistant bronze. Helical worm gears are equipped with a helical equipment. Worm gears with shrink disc, torque limiter, along with adjustable backlash designs are also part of our standard item range.
Worm gearboxes and helical worm gearboxes type S and SS are high-Performance gearboxes in universal design. The housings are manufactured from high quality cast iron. The rugget wall space and internal ribbing ensure incredibly torsional stiff and sound dampening housings. The exterior ripping offers a rapid heat conducting.
Type S und SS
Technical characteristics:
Optimised size/performance ratio
Designed for permanent procedure under rough circumstances
Above average lifespan
Housing produced from top quality grey cast iron with rugged walls and internal ribbing
Severe torsional resistance and low noise
Case hardened worm shafts and worms with precision surface flanks
Worm wheels produced from unique bronze
Superior smooth operation
Space saving angular drive
Helical worm gearboxes built with helical gear wheel
Low engine speeds
Options:
Basic mounting, flange installation or universal design
Output shaft available since solid shaft or hollow shaft
Shrink disc, torque limiter,and also adjustable backlash
Second shaft end for fitting encoders or brakes
Torque arm
IEC-adaptor
NEMA version
Free input shaft
ATEX specification according to directive 94/9/EG
