Drive sprocket

A chain and sprocket drive is a kind of power transmission when a roller chain engages with two or more toothed wheels or sprockets, found in engines as a drivefrom crankshaft to camshaft.
Ever-power is proud to share a wide selection of Sprockets along with this huge variety of agriculture, gardening, preparing food and outdoor items. We stand behind all 26,000 products we sell with this Satisfaction Guarantee. CUSTOMER SUPPORT is the cornerstone of us business, and has been for over 50 years.
Application
Ever-power travel sprockets provide rugged, reliable service and show replaceable tooth plates for convenient field repair. Tooth plates for 102 and 142 series chain are available with a segmental/symmetrical reversible tooth profile. The 142 DBL, TPL plus the 175 and 260 series use our nonsymmetrical profile.
Travel sprockets weren’t always made to be bolted upon. At one time they were welded onto the final drive motor and had to be minimize off if they were replaced. Eventually, welded-on adapters were installed that allowed the sprocket to always be bolted on, and more modern designs use the bolted approach altogether.
When someone sends in a final drive motor for us to check out or?rebuild/reman, we advise them to remove the sprocket. We don’t will need the sprocket in place to evaluate the electric motor and the added pounds (which may be significant) unnecessarily boosts your shipping costs.
Signs of Sprocket Wear
One's teeth on a drive sprocket are where you look for wear . They must be tall and smooth at the end, not razor-sharp or dished towards the end. And the sprocket, and even more specifically its teeth, commence to wear, its size becomes scaled-down. This causes what is referred to as a pitch mismatch, where the pearly whites on the sprocket no longer connect to the track links as effectively. This can accelerate the use of the sprocket and decrease the efficiency of your products.
If your sprocket shows sign of excessive wear, then its time to displace it before it starts to cause abnormal track wear or starts to negatively affect the performance of your final drive electric motor.
Preventing Sprocket Wear
Among the key methods to prevent accelerated sprocket dress in is to check the track pressure. If the strain is too tight, it'll cause dress in on the sprocket tooth. We’ve talked before about the importance of keeping the undercarriage clean, and the health of the undercarriage make a difference the track tension (particularly if there can be a build up of dried mud and debris). That's the main explanation we put so much focus on keeping the undercarriage clean
Conclusion
Without a functioning drive sprocket, your track drive won’t have the ability to propel your machine. Fortunately, there are ways to help your travel sprocket go longer: keep the track pressure at an effective level and retain your undercarriage clean.
DRIVE SPROCKET
The undercarriage of your track equipment should be inspected regularly. If you discover early wear or damage to your tracks, a worn sprocket could be the cause.
15 cogs / teeth
16.77 inches in diameter
12 equally spaced bolt holes
Fits the next Bobcat Compact Track Loaders: T180, T190, T550, T590
Parts can vary according to your serial number.
All Ever-electricity sprocket tooth profiles are induction hardened to 55 Rockwell C., and are replaceable. The substitute and protection of tooth plate segments will not require removing of the drive shaft, bearings, etc. Ever-power also designs custom split hub pieces for retrofit applications that minimize field labor costs.
At 1st glance, you might feel that if you’ve seen one drive sprocket, you’ve seen all of them. However, Ever-electrical power provides added an I.D. lip and spiral band that captivate the needle bearing along with an exterior snap ring that improves performance and dependability. While simple to overlook, it’s this focus on detail that the racer possesses come to expect from Ever-power.
An I.D. lip and spiral ring that captivate the needle bearing
External snap ring caps sprocket about drum & increases durability
CNC-machined teeth include a corrosion-resistant finish
Specifics:
Chain Type: #219
Tooth Configuration: Standard

finde uns

Ever-power Schaftkragen Co., Ltd.

Mail: [email protected]

Als einer der führenden Hersteller, Lieferanten und Exporteure von mechanischen Produkten in China, bieten wir Reduzierstücke, Kettenräder, Industrie- und Förderketten, Riemen, Riemenscheiben, Zahnräder, Zahnstangen, Getriebe, Motoren, PTO-Wellen, Taper Lock Bushing, Vakuumpumpen, Schraubenluft Kompressoren und viele andere Produkte. Bitte kontaktieren Sie uns für Details.

Std:
Montag bis Freitag: 9.00 bis 18.00 Uhr
Samstag und Sonntag: 10:00 - 16:00 Uhr

Recent Posts