Fan Motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, taken off unused 18” or 24” China Air flow Compressor diameter TPI fans. Designed to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor has a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring in the middle of your electric electric motor, capacitor and quickness control switch is still hooked up however the cord itself is normally detached as observed in the photos. (Discover “Control Notice” below for change type.)
T (See “Program Notice” below for utilize in a variety of other applications.)
electric fan motor china Dimensions: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft can be½” (0.500″) diameter x 2 ½” long with a collection screw clean. There are (4) threaded mounting lugs on the front of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs may actually 've got 4mm threads and also to end up being on a 117mm (4.6”)diameter circle (3 ¼” measured in one stud to another).
Rate: The approximate motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electrical motor) is Clockwise.
Control Take notice: Motors will come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we've demonstrated BOTH versions in the images). Both of these types of switches both control the engine in the same way (but you possess a rotating knob and you have got a pull-chain). If you order several motor at a time, we can do our better to supply your purchase with each one sort of control or the excess.
Application Note: Do NOT use this electric motor in a nonfan software. This is a totally enclosed fan electric engine and made to have continuous ventilation over the engine casing for cooling. The casing isn’t vented and the electrical motor will 
overheat and enter automatic thermal overload if operate in a nonfan plan where there isn’t solid ventilation past the electric motor. (Caution Note: the electrical motor will restart immediately when it cools cool off.) Using this electric motor for applications aside from 18 & 24″ TPI fans may possibly also overload the engine and cause it to proceed into automated thermal overload. (Your lover blade from another manufacturer may have a steeper blade angle.)
Origin: This electric engine is manufactured in China.