Fan Motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, removed from unused 18” or 24” China Surroundings Compressor diameter TPI fans. Made to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor includes a (detached) cord with grounded plug, motor capacitor and a 3-speed Electric Fan Motor control switch. All of the wiring between your electric engine, capacitor and quickness control switch is still installed nevertheless the cord itself is normally detached as observed in the photos. (Discover “Control Notice” below for change type.)
T (See “Application Notice” below for utilize in a variety of other applications.)
Sizes: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft is certainly½” (0.500″) diameter x 2 ½” long with a collection screw easy. There are (4) threaded mounting lugs on leading of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs may actually ‘ve got 4mm threads and also to be on a 117mm (4.6”)diameter circle (3 ¼” measured in one stud to another).
Rate: The approximate electric motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electric motor) is Clockwise.
Control Take note: Motors will come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH versions in the images). These two types of switches both control the engine just as (but you possess a rotating knob and you possess a pull-chain). If you order several engine at the same time, we can do our best to supply your order with each one sort of control or the additional.
Application Note: Do NOT use this electric engine in a nonfan software. This is a completely enclosed fan electric motor and made to have constant ventilation over the motor casing for cooling. The casing isn’t vented and the electric powered electric motor will overheat and enter automated thermal overload if operate in a nonfan program where there isn’t strong ventilation past the motor. (Caution Note: the electric motor will restart immediately when it cools cool off.) Using this electrical motor for applications apart from 18 & 24″ TPI fans could also overload the motor and cause it to proceed into automatic thermal overload. (Your lover blade from another manufacturer may possess a steeper blade position.)
Origin: This electric motor is produced in China.