The EP Greenhouse reducer is a compact and lightweight reduction gear motor with an integrated limit switch system that's ideal for assembly of a locally available electric engine. The gear reducer can be used in manually-controlled or climate-managed ventilation and display screen systems in greenhouses. The quick and easy-to-install EP gear driver is definitely rainproof and windproof. The gearbox includes a high protection course (IP65) and can be utilized in an ambient temperature of 0-60 °C.
The low-noise gear driver for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminum precision housing. The self-braking worm wheel transmission means that the drive shaft is definitely locked when the decrease reducer isn't running. The completely sealed reduction geared motor comes with an growth chamber with a diaphragm to keep the gear oil at a minimal pressure under all circumstances, even at high temps. Thanks to the use of an expansion chamber, the gear driver can be installed in any placement. There are no limitations, since there is no dependence on a bleed connect. The sealed reduction gear driver keeps the apparatus oil of the gear driver in optimal condition for its entire operating lifetime. The gearbox is ideal for discontinuous use, working class s3-30%, with a maximum activation time of 25 minutes.
The Gear box reduction gearbox comes with an FT85 motor assembly flange, on to which a suitable IEC standard motor can simply be installed (EN 50347).
The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit switch system is installed within an built-in chamber and is enclosed by an impact-resistant plastic-type material cover. The limit change system is obtainable and easy to adjust. The limit change system's optimum switching range can be 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The reducer comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The gear driver for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys 
and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.
Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of app of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temperatures of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, optimum activation time 25 minutes.
Equipped as standard with 16-tooth galvanised chain coupling 5/8"x3/8".
FT85 motor assembly flange for installing IEC standard motor (EN 50347).
Maximum switching range of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).