one.A connecting link of an O-ring Chain for basic application is pre-coated with grease in the pins. Before connection, verify the grease to the surfaces of pins, and when the volume of grease is compact, apply grease with bare hands. (If gloves are used, the grease will probably be absorbed through the gloves.)
Illustration: Once the connecting hyperlink (I) of an O-ring chain for general application is
shipped, O-rings are fitted in the roots in the pins. Should the O-rings come loose on account of vibration all through transport, refit the O-rings in on the roots with the pins.
In this case, you'll want to return the grease collected with the roots of your pins to the central surfaces of the pins, far more at portion A than at portions B proven inside the above illustration. (Portions A is worn due to sliding using the bushings.)
two.The chain can be most very easily connected within the teeth of the sprocket. Engage the back links at each ends in the chain with the sprocket teeth and fit connecting pins. In case the sprocket might be moved, the chain can also be connected around the loosened side.
3. Connecting procedure
1.Verify that O-rings are connected to the roots on the pins.
two.Should the amount of grease applied around the connecting pins is small, coat the pins with grease on the central portions.
three.Insert the connecting pins to the bushings in the inner links at both ends.
four.Confirm that the grease is applied towards the entire face with the O-ring, and match the O-ring onto the connecting pins.
5.Insert the connecting pins in to the connecting plate and when pressing the connecting plate, install the spring clip. Verify whether or not the head (the finish without a split) on the spring clip is turned in the feeding path of the chain. (See the next illustration.)
6.Be sure you confirm the spring clip is securely fitted while in the clip grooves on the connecting pins.
This completes jointing with the connecting link. Note that grease within the surfaces of connecting pins and 
O-rings might be eliminated through installation work. In this instance, re-grease working with the grease around the surface in the base chain or even the grease during the polyethylene bag through which the connecting hyperlink was contained.
