Material Dealing with Power UNIT 1
Basic Description
This electrical power unit is made for your fork lift business, consisting of extremely efficient gear pump, DC motor, manual increase and decrease valve, tank, ect. The up and down motion are managed by the lever with the manual release valve, which is equipped with an electric switch to activate the motor. The lowing pace is controlled through the stress compensated flow control valve.
Particular Notes
1. The duty of this power unit is S3, i.e. 30 seconds on and 270 senconds off.
two. Clean all of the hydraulic components concerned in advance of set up of the power unit.
three. Viscosity of your hydraulic oil shoud be 15~46 cst, which ought to also be clean and no cost of impurities, N46 hydraulic oil is suggested .
four. Oil transforming is required following the initial 100 operation hours, afterwards as soon as just about every 3000 hours.
five. The electrical power unit proven is built to be mounted horizontally.
Material Managing Power UNIT two
General Description
This energy unit options electrical power up gravity down circuit. Activate the start solenoid to start out the motor to lift the machine. The lowing movement is activated through the solenoid valve with the lowering speed controlled through the strain compensated flow control valve. Goods of this series is often broadly used in the business of logistic products such as fork lift, mini lift table, and so on.
Specific Notes
1. The duty of this electrical power unit is S3,i.e.,thirty 
seconds on and 270 senconds off.
two. Clean the many hydraulic elements concerned ahead of mounting the electrical power unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst,which really should also be clean and absolutely free of impurities, N46 hydraulic oil is recommended .
four. Oil transforming is needed following the original one hundred operation hours,afterwards the moment every single 3000 hours.
five. The electrical power unit should be mounted horizontally.