China High Temperature 99 Alumina Ceramic Furnace Tube for Tube Muffle shaft collar with set screw

Item Description

We are providing a vast selection of ceramic tubes and rods produced from innovative complex ceramics including
one.alumina(Alsint ninety nine.7 Type C 799/ Rubalit C 799/ninety nine.7% al2O3, 96% Dense Al2O3,Pythagoras Sort C 610/ Dimulit C610, Sillimatin sixty Variety C 530,Mullite/ Aluminium Silicate/3Al2O3•2SiO2),

2.zirconia (TTZ/ Magnesia partly stabilized ZrO2YTZP/Yttria partly stabilized ZrO2ZDY/ Yttria totally stabilized ZrO2)

three.silicon carbide(Recrystallized sic,nitride bonded sic, response sintering sic/RB sic ).
These tubes are in numerous of sizes, designs and configurations for illustration:solitary bore, double bores, 4 bores, dee tubing, oval styles, customized shapes.

Major software:
Protection sheaths in higher temperature measurement.
Thermocouple factors
Igniter tubes
Thermostats
Turbine casting supports
Surgical devices
Knife sharpeners
Wafer processing parts
Ceramic insulators
Vacuum units
High-electricity resistor
 

Big 95% ninety nine.7% alumina tube for furnace,equally ends open,single hole
OD x ID in mm Length in mm
.7x0.three -a thousand
.8x0.four -one thousand
.9x0.4 -a thousand
1.0x0.5 -a thousand
1.2x0.six -1000
one.3x0.seven -a thousand
1.4x0.eight -1000
one.5x0.8 -2500
2x1 -2500
3x2 -2500
4x3 -2500
5x3.five -2500
6x4 -2500
7x4.5 -2500
8x4 -2500
9x6 -2500
10x7 -2500
12x4 -2500
14x4 -2500
14x10 -2500
15x11 -2500
16x12 -2500
18x14 -2500
20x15 -2500
25x19 -2500
30x25 -2500
150x140 -2500
200x190 -2500

 

95%,ninety nine.7% alumina ceramic protection tube,one stop closed
OD x ID in mm Size in mm
5x3 -1500
6x4 -1500
8x5 -2500
10x6 -2500
11x8 -2500
12x7 -2500
14x10 -2500
15x11 -2500
16x12 -2500
17x12 -2500
19x14 -2500
20x14 -2500
22x16 -2500
24x17 -2500
25x19 -2500
26x20 -2500
28x22 -2500
30x24 -2500

 

Big ninety five% 99.7% alumina tube for furnace,each ends open up /one stop shut
OD x ID in mm Duration in mm
45x35 -2000
50x40 -2000
60x50 -2000
70x60 -2000
80x70 -2300
90x80 -2000
100x90 -2000
110x100 -1700
120x110 -1700

 

Condition of hole  ninety five% ninety nine.7% alumina square / rectangular tube Length 
Single hole fifteen*fifteen,16*16,twelve*9,16*twelve -2500mm

 

2 Bore / 4 bore alumina ceramic insulation tube in 95%,99.7% alumina
Nos of Hole  Od x Hole diameter in mm Duration
Round 2 hole  1x0.3 / 1.2 x0.3 / 1.4x0.four -1500mm
Spherical 2 gap 1.5x0.4 / 2x0.3 / 2x0.5 / 2x0.6 / 2.5x0.7 / 3x0.7 -2500mm
Round 2 gap 3.5x0.8 / 3.5x1 / 4x1.2 / 4x1.5 / 4.5x1.2  -2500mm
Spherical 2 hole 5x1.2 / 5x1.5 / 5.5x1.5 / 5.5x1.8 / 6x1.8 -2500mm
Round 2 hole 6.5x1.8 / 6.5x2 / 8x2 / 8x2.4 / 10x2.7 / 16x4.9 -2500mm
Spherical 4 hole one.5x0.3 / 2x0.4 / 2.5x0.6 / 3x0.8 / 3.5x0.8 / 3.5x1 -2500mm
Round 4 gap 4x1 / 4x1.3 / 4.5x1.2 / 5x1.2 / 5.5x1.3 / 6x1.three -2500mm
Spherical 4 hole six.5x1.4 / 8x2 / 10x3 / 12x3.9 / 14x3.9 / 16x4 -2500mm

To Be Negotiated 5 Pieces
(Min. Order)

###

Application: Refractory, Structure Ceramic, Industrial Ceramic
Material: Alumina Ceramic
Type: Ceramic Tubes
Color: White,Ivory,Yellow,Pink,Cream
Shape: Square,Tubular,Oval,Rectangular,Half
Use: Thermocouples,Furnace,Temperature Measurement

###

Customization:

###

Big 95% 99.7% alumina tube for furnace,both ends open,single hole
OD x ID in mm Length in mm
0.7x0.3 0-1000
0.8x0.4 0-1000
0.9x0.4 0-1000
1.0x0.5 0-1000
1.2x0.6 0-1000
1.3x0.7 0-1000
1.4x0.8 0-1000
1.5x0.8 0-2500
2x1 0-2500
3x2 0-2500
4x3 0-2500
5x3.5 0-2500
6x4 0-2500
7x4.5 0-2500
8x4 0-2500
9x6 0-2500
10x7 0-2500
12x4 0-2500
14x4 0-2500
14x10 0-2500
15x11 0-2500
16x12 0-2500
18x14 0-2500
20x15 0-2500
25x19 0-2500
30x25 0-2500
150x140 0-2500
200x190 0-2500

###

95%,99.7% alumina ceramic protection tube,one end closed
OD x ID in mm Length in mm
5x3 0-1500
6x4 0-1500
8x5 0-2500
10x6 0-2500
11x8 0-2500
12x7 0-2500
14x10 0-2500
15x11 0-2500
16x12 0-2500
17x12 0-2500
19x14 0-2500
20x14 0-2500
22x16 0-2500
24x17 0-2500
25x19 0-2500
26x20 0-2500
28x22 0-2500
30x24 0-2500

###

Big 95% 99.7% alumina tube for furnace,both ends open /one end closed
OD x ID in mm Length in mm
45x35 0-2000
50x40 0-2000
60x50 0-2000
70x60 0-2000
80x70 0-2300
90x80 0-2000
100x90 0-2000
110x100 0-1700
120x110 0-1700

###

Shape of hole  95% 99.7% alumina square / rectangular tube Length 
Single hole 15*15,16*16,12*9,16*12 0-2500mm

###

2 Bore / 4 bore alumina ceramic insulation tube in 95%,99.7% alumina
Nos of Hole  Od x Hole diameter in mm Length
Round 2 hole  1x0.3 / 1.2 x0.3 / 1.4x0.4 0-1500mm
Round 2 hole 1.5x0.4 / 2x0.3 / 2x0.5 / 2x0.6 / 2.5x0.7 / 3x0.7 0-2500mm
Round 2 hole 3.5x0.8 / 3.5x1 / 4x1.2 / 4x1.5 / 4.5x1.2  0-2500mm
Round 2 hole 5x1.2 / 5x1.5 / 5.5x1.5 / 5.5x1.8 / 6x1.8 0-2500mm
Round 2 hole 6.5x1.8 / 6.5x2 / 8x2 / 8x2.4 / 10x2.7 / 16x4.9 0-2500mm
Round 4 hole 1.5x0.3 / 2x0.4 / 2.5x0.6 / 3x0.8 / 3.5x0.8 / 3.5x1 0-2500mm
Round 4 hole 4x1 / 4x1.3 / 4.5x1.2 / 5x1.2 / 5.5x1.3 / 6x1.3 0-2500mm
Round 4 hole 6.5x1.4 / 8x2 / 10x3 / 12x3.9 / 14x3.9 / 16x4 0-2500mm
To Be Negotiated 5 Pieces
(Min. Order)

###

Application: Refractory, Structure Ceramic, Industrial Ceramic
Material: Alumina Ceramic
Type: Ceramic Tubes
Color: White,Ivory,Yellow,Pink,Cream
Shape: Square,Tubular,Oval,Rectangular,Half
Use: Thermocouples,Furnace,Temperature Measurement

###

Customization:

###

Big 95% 99.7% alumina tube for furnace,both ends open,single hole
OD x ID in mm Length in mm
0.7x0.3 0-1000
0.8x0.4 0-1000
0.9x0.4 0-1000
1.0x0.5 0-1000
1.2x0.6 0-1000
1.3x0.7 0-1000
1.4x0.8 0-1000
1.5x0.8 0-2500
2x1 0-2500
3x2 0-2500
4x3 0-2500
5x3.5 0-2500
6x4 0-2500
7x4.5 0-2500
8x4 0-2500
9x6 0-2500
10x7 0-2500
12x4 0-2500
14x4 0-2500
14x10 0-2500
15x11 0-2500
16x12 0-2500
18x14 0-2500
20x15 0-2500
25x19 0-2500
30x25 0-2500
150x140 0-2500
200x190 0-2500

###

95%,99.7% alumina ceramic protection tube,one end closed
OD x ID in mm Length in mm
5x3 0-1500
6x4 0-1500
8x5 0-2500
10x6 0-2500
11x8 0-2500
12x7 0-2500
14x10 0-2500
15x11 0-2500
16x12 0-2500
17x12 0-2500
19x14 0-2500
20x14 0-2500
22x16 0-2500
24x17 0-2500
25x19 0-2500
26x20 0-2500
28x22 0-2500
30x24 0-2500

###

Big 95% 99.7% alumina tube for furnace,both ends open /one end closed
OD x ID in mm Length in mm
45x35 0-2000
50x40 0-2000
60x50 0-2000
70x60 0-2000
80x70 0-2300
90x80 0-2000
100x90 0-2000
110x100 0-1700
120x110 0-1700

###

Shape of hole  95% 99.7% alumina square / rectangular tube Length 
Single hole 15*15,16*16,12*9,16*12 0-2500mm

###

2 Bore / 4 bore alumina ceramic insulation tube in 95%,99.7% alumina
Nos of Hole  Od x Hole diameter in mm Length
Round 2 hole  1x0.3 / 1.2 x0.3 / 1.4x0.4 0-1500mm
Round 2 hole 1.5x0.4 / 2x0.3 / 2x0.5 / 2x0.6 / 2.5x0.7 / 3x0.7 0-2500mm
Round 2 hole 3.5x0.8 / 3.5x1 / 4x1.2 / 4x1.5 / 4.5x1.2  0-2500mm
Round 2 hole 5x1.2 / 5x1.5 / 5.5x1.5 / 5.5x1.8 / 6x1.8 0-2500mm
Round 2 hole 6.5x1.8 / 6.5x2 / 8x2 / 8x2.4 / 10x2.7 / 16x4.9 0-2500mm
Round 4 hole 1.5x0.3 / 2x0.4 / 2.5x0.6 / 3x0.8 / 3.5x0.8 / 3.5x1 0-2500mm
Round 4 hole 4x1 / 4x1.3 / 4.5x1.2 / 5x1.2 / 5.5x1.3 / 6x1.3 0-2500mm
Round 4 hole 6.5x1.4 / 8x2 / 10x3 / 12x3.9 / 14x3.9 / 16x4 0-2500mm

How to Choose the Right Shaft Collar

A shaft collar is a small, inexpensive machine component that serves a variety of purposes in power transmission. It is most commonly used in gearboxes and motors. It can serve as a mechanical stop, bearing face, or locating component. Its simple design makes it easy to install. Here are some of the most common types and their functions.
Shaft Collar

Function

Shaft collars are an important part of many mechanical systems. These devices hold mechanical components on a shaft and also help mount shafts on flat surfaces. They are available in many different styles, sizes, and materials. Selecting the right shaft collar is essential in preventing damage to components. Stafford Manufacturing, a leading manufacturer of shaft collars and other related mechanical components, can help you choose the right one for your application.
There are two main types of shaft collars. The first is the Heavy Duty type. It has a larger outer diameter and wider opening. While this may seem to increase holding power, the problem with that is that it can reduce the amount of space the collar has on the shaft. On the other hand, the Thin Line type is similar, but is made with smaller outer diameters. Another type is the Threaded Bore shaft collar. These shaft collars offer exceptional axial holding power, and are designed to protect threaded shafts without causing any damage.
A shaft collar has many uses and is typically used in industrial applications. It can act as a spacer and to stop shaft movement in reciprocating applications. It can also be used to align and position parts of automation machinery.

Types

There are several different types of shaft collars. These components are critical for a variety of applications, and their design plays a large role in the performance of the resulting product. To select the most appropriate collar, designers must consider several factors, including the style, material, bore size, and geometry of the shaft. Many manufacturers provide performance data, and users can contact them for assistance.
There are many different types of shaft collars, which make it important to understand how each one works and what applications they can serve. Fortunately, shaft collars are easy to install and require little maintenance. Whether you need to secure industrial railings or position medical equipment, shaft collars are a versatile component that can be tailored to meet your needs.
One type of shaft collar is the locking collar. This type of shaft collar has a threaded end that is designed to mate with spindle bearings. They offer an increased TIR than standard shaft collars and allow for precise preload control. They also feature slots for spanner wrenches.
Shaft Collar

Sizes

Shaft collars come in a variety of sizes. You can get a small diameter shaft collar for small equipment, or a large diameter shaft collar for larger equipment. Both styles are made from solid steel, and they come in several thicknesses. You can choose between one-half inch and six-inch collars, depending on your needs.
There are no specific standards for shaft collars, but most manufacturers have similar designs. They're either single-point faced or double-split, and can be fine or coarse threaded. They're often used as mechanical stops, bearing faces, or as locating components. Their bore is either fine or coarse, and their outside diameter and width are determined by the shaft diameter.
Shaft collars are commonly found in mechanical and automation equipment. These ring-shaped devices hold motor components, sprockets, and bearings in place. They also allow them to be adjusted and positioned precisely. A shaft collar is often used to connect the end of a shaft to a mechanical stop.
Another type of shaft collar is called a set collar. It has a recessed area for a screw to bite into a shaft. These collars are perfect for holding sprocket hubs, bearings, and spacers. They can also be used as a rigid coupling.

Cost

When choosing a shaft collar, consider its intended application and cost. Some shaft collars are very expensive while others are quite affordable. Choose one that meets the needs of your assembly. If you're using the shaft collar infrequently, a clamp style or a set screw style may be a better choice. Then, you can easily adjust or disassemble it with just a few tools. If you're using it more frequently, choose a two-piece shaft collar.
The material of the shaft collar is also an important consideration. Steel and stainless steel are common choices. While both materials are strong and durable, steel tends to have better holding power. However, aluminum shaft collars are lighter and provide better strength-to-weight ratio. The type of material you choose depends on the amount of corrosion protection you need, and whether you'll need the collar to resist extreme temperatures. If the shaft collar is going to be used in a hot environment, you may want to go with a titanium collar.
There are many different sizes and types of shaft collars. The type of collar you choose depends on the specific application and the system it'll be used in. Consider the dimensions of your shaft, the material of the shaft, and the length of the shaft to find the right fit. If you're not sure what size you need, ask a manufacturer for help.
Shaft Collar

Placement on shaft

In some applications, the placement of the shaft collar can be critical to the overall performance of the machine. The collar's design must take many factors into account, including material, style, bore size, and shaft geometry. If a user is uncertain of the proper placement of their collar, they should refer to the manufacturer's website for guidance.
While shaft collars may look simple, they're actually essential mechanical components that are used in almost every type of machinery. Despite their ubiquitous use in every industry, they are often underappreciated due to their complexity. Many people aren't aware of their importance or the various types of collars available. This shaft collar guide will provide detailed information to help you find the right shaft collar for your specific application.
The surface treatment of the shaft collar is another important factor that contributes to its holding power. The most common treatment is a black oxide finish. This finish enhances screw torque while preserving the frictional properties of the bore. This finish can be further optimized by applying light oil to the screw. Zinc plating is also a good option for shaft collars. This material offers better corrosion resistance, but can reduce holding power.

Clamp style

A clamp style shaft collar is a simple and effective tool for securing shafts in machine tools. Its two-piece design allows for quick and easy positioning adjustments and has greater holding power than set screw collars. In addition, its friction-based connection maintains ease of use and prevents shaft damage. This type of collar is also more corrosion resistant than set screw collars.
There are several different types of shaft collars, including single and double split collars. Single-piece clamp collars are anchored into the shaft with a single tangential screw, whereas double-piece collars are anchored to the shaft with two socket cap screws. The latter type provides more stability and axial holding power and is suitable for rotating assemblies. A single or double-piece clamp collar can also be threaded to allow for precise positioning along the shaft. Its internal threads also provide enhanced support for high axial loads and act as a positive mechanical stop.
There are different types of shaft collars, each with its own set of advantages and disadvantages. A set-screw collar may be preferred over a clamp-style shaft collar, but it's not the only choice. A set-screw collar can severely mar the shaft and can prevent fine adjustments. However, it is a good idea to use the torque wrench when tightening a shaft collar.

Zinc plated

Zinc plated shaft collars are available in a variety of sizes. They are precision machined from cold finished steel bar stock and zinc plated for corrosion resistance. They are also very attractive. They are made in the USA. Whether you need a zinc-plated shaft collar for a simple repair or a more complicated installation, Lovejoy has the right solution for your needs.
The CZPT MSP-12-FZ two-piece shaft collar has a 12mm bore, 28mm OD, and 11mm width. Its clamp style design allows you to easily install and remove the shaft collar. It is easily adjustable and is stamped with the CZPT name.
China High Temperature 99 Alumina Ceramic Furnace Tube for Tube Muffle     shaft collar with set screwChina High Temperature 99 Alumina Ceramic Furnace Tube for Tube Muffle     shaft collar with set screw
editor by czh 2023-01-20

finde uns

Ever-power Schaftkragen Co., Ltd.

Mail: sales@china-shaft-collar.xyz

Als einer der führenden Hersteller, Lieferanten und Exporteure von mechanischen Produkten in China, bieten wir Reduzierstücke, Kettenräder, Industrie- und Förderketten, Riemen, Riemenscheiben, Zahnräder, Zahnstangen, Getriebe, Motoren, PTO-Wellen, Taper Lock Bushing, Vakuumpumpen, Schraubenluft Kompressoren und viele andere Produkte. Bitte kontaktieren Sie uns für Details.

Std:
Montag bis Freitag: 9.00 bis 18.00 Uhr
Samstag und Sonntag: 10:00 - 16:00 Uhr

Recent Posts