China Semi-Automatic LPG Cylinder Handle Welding Machine Made in China bearing shaft collar

Solution Description

Semi-automatic LPG cylinder manage welding equipment / generation line

------Principal specialized parameter
 

Motor electricity .55KW
Air stress .5-.7Mpa
Voltage AC380V
Welding pace twenty five s/pcs
Device fat 600kgs
Equipped with CO2 fuel shielded welding device
One operator can get care of 2 sets device at the exact same time
The equipment need to be linked with the h2o tank

Choice A: Horizontal sort (single torch)

Alternative B: Vertical variety (double or triple torches)

------ Other advantaged LPG cylinder equipment
Except giving the semi-car device which is fit for the clients' spending budget, we are capable to source the complete-auto welding technique to help our consumers attain the high doing work efficiency and decrease the manpower price, listing some of our advantaged complete-automated welding machines as below:
 

Complete automatic welding line
 

Total-auto welding equipment consists of socket welding, deal with/collar welding, foundation ring welding, circumference welding, and all devices operate routinely, the cylinder halves are conveyed by mechancial arm and chain, this technique actually will save significantly labor expense and enhance the functioning effectiveness apparently.

Portion A:Template total computerized welding line layout

Element B:Total automated welding line thorough introduction

 

[Entire vehicle socket welding]
 

This equipment is utilized for higher cap socket welding and edge welding element sprucing.Equip with CZPT YD-350GL4 welder 1 set, h2o cooling welding CZPT 1 pcs, 8L computerized cycle drinking water cooling tank 1 set.The principal shaft motor is .75KW.Sprucing motor is 1.5KW, equip with the grating stability security.

Equip with NO.6 Hydraulic station, 1 set, vane pump, 5.5KW.Setting force:Falling 4 MPa, climbing 9 MPa.

 

[Complete auto manage welding]
 

This equipment is employed for higher cap hadnle welding.Equip with 3 sets welding torch, 3 welders complete at 1 time.Equip with CZPT YD-350GL4 welders 3 sets, welding CZPT 3 pieces.Main shaft motor is .4KW, with the grating protection safety.

Equip with No.7 hydraulic station, vane pump, 5.5KW.Location stress:Pressing 4MPa, rising 9MPa.

[Total vehicle base ring welding]

This machine is used for reduce cap bottom base welding, equip with 3 welding torch, 6 welders could be concluded at 2 moments.Equip with CZPT YD-350GL4 welder 3 sets, welding CZPT 3 piece.Primary shaft motor .4KW, with the grating stability defense.

Equip with No.3 hydraulic station, vane pump, 5.5KW, placing force:Urgent 4MPa, climbing 10MPa.

[Total auto one head circumference welding]

This machine is employed for cylinder higher shell and decrease shell welding, it adopts seam eyesight tracking device, computerized imaging to tracking welding seam, welding the circumferential seam immediately, no need of manual intervention.It adopts CZPT 500GS (special) large-speed pulse MIG welding supply.Welding pace can achieve to 1000mm/min.It adopts double internal cooling MIG torch, it is suitable for extended time welding.It is outfitted with Supercooler automated circulating cooling water tank to cooling the welding CZPT circularly.

------Right after Sale Service

Well timed & Pleased oversea installation support

We have wealthy expertise for oversea set up and commissioning perform, we usually ship the competent engineers for helping our customers to run the device efficiently and quickly.

------ Our Manufacturing facility Web site
Our robust machining ability 

Our employed employees are over a hundred for diverse working approach, such as milling lathe,  punching machine, warmth remedy, grinding machine, result in we make all machine parts by ourselves, we can make certain the components top quality by one hundred%.

Moreover, with strong manufacuting ability, we can delivery every purchase on time.

------ Organization Introduction

HangZhou Longterm Equipment Technologies Co.,Ltd
 

HangZhou Longterm Equipment Technologies Co.,Ltd is the specialist maker of vehicle-welding tools (MIG, TIG, Magazine, PAW) and computerized welding system integration, as well as related equipment.Owing to very computerized, simple operation, welding toughness and support daily life with the identical stainless metal and plate, is commonly utilized in aerospace, chemical market, machinery, pressure vessels, hearth extinguishers, water heater, enamel drinking water tank, stainless metal merchandise and other industries.

------ Customer checking out

So significantly, our equipment have been exported to Canada, US, India, Turkey, Thailand, Vietnam, Nigeria, Ghana, Argentina, Bangladesh and many others. With our unsurpassed provider, all machines are managing smoothly and completely in our clients' manufacturing facility and aid them earn a lot more markets.

------ FAQ
In order to suggest you the correct device, we would like to get the below from you:

- What's the take care of form you are utilizing?
- It is far better to supply the cylinder drawing or take care of drawing.
- What is the daily capacity you want to achieve?

Transmission Type: Flexible
Automatic Production Line: Comprehensive
Certification: ISO, CE
Automation: Automation
Flexible Production: Lean Production
Rhythm: Flow Production Line

###

Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Motor power 0.55KW
Air pressure 0.5-0.7Mpa
Voltage AC380V
Welding speed 25 s/pcs
Machine weight 600kgs
Equipped with CO2 gas shielded welding machine
One operator can take care of two sets machine at the same time
The machine should be connected with the water tank
Transmission Type: Flexible
Automatic Production Line: Comprehensive
Certification: ISO, CE
Automation: Automation
Flexible Production: Lean Production
Rhythm: Flow Production Line

###

Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Motor power 0.55KW
Air pressure 0.5-0.7Mpa
Voltage AC380V
Welding speed 25 s/pcs
Machine weight 600kgs
Equipped with CO2 gas shielded welding machine
One operator can take care of two sets machine at the same time
The machine should be connected with the water tank

Types of Shaft Collars

A shaft collar is a simple machine component that is an integral part of many power transmission applications. It is most commonly found in motors and gearboxes and serves as a mechanical stop, locating component, and bearing face. Its easy installation and quick assembly make it an ideal component for a variety of applications.
Shaft Collar

Clamp-style shaft collars

Clamp-style shaft collars are fasteners that fit over shafts. They can be made of aluminum, steel, or titanium. Stainless steel collars are available in corrosion-resistant finishes to prevent galling. Engineered plastics are also available. Black oxide finishes improve corrosion resistance and provide a smooth surface for screw installation.
The holding power of Clamp-style shaft collars depends on the shaft's bore size and concentricity, which are important factors in many applications. The fastening hardware is also important, as it can affect torque transmission. For example, forged screws are superior to broached screws in a number of ways, including reduced risk of reaming out. In addition, the material of the collar must be strong enough to withstand the torque required by the screw.
Shaft collars are complicated components. Their performance can determine the efficiency of an application. The design process is complex, and many factors are considered. Considerations include shaft geometry, bore size, and style. Shaft collar manufacturers will provide performance information on their website. If you are not satisfied with the information provided, you can contact the manufacturer.
Clamp-style shaft collars are made from high-quality materials. The metal used to produce them is lead-free and stainless, which resist corrosion. Moreover, these shaft collars have a high holding power, so they won't mar your shaft and ensure proper alignment. These collars can be found in a variety of bore sizes, from 1/8" to six inches.
Clamp-style shaft collars are available in lead-free steel, 303 and 316 stainless steel, and aluminum. They are available in a one-piece clamp or a two-piece clamp style. They are made of high-grade steel and are machined to a burr-free surface.
Clamp-style shaft collars have two-piece clamps that can be easily disassembled and installed in their proper position. Two-piece clamps are stronger than one-piece collars because all of the clamping force goes directly into the clamping shaft. Two-screw clamps have two and four-screws, and can also be wrench-tightened.
Set screw collars were one of the first shaft collars to be mass-produced. They were often used on line shafting in early manufacturing mills. While they can work well for simple shaft positioning, they're not the most reliable option for complicated applications. Furthermore, set screws can cause damage to the shaft, making it difficult to reposition the collar or adjust its angle. For this reason, small flats are usually added to the shaft at set screw locations.
Shaft Collar

Set-screw shaft collars

Set-screw shaft collars are used to secure a shaft to a screw. They are available in several sizes and materials. Typical types include the solid, quick-release, split, and threaded styles. They come in an assortment of sizes and materials, including aluminum, zinc plated steel, and black oxide steel. Most are available in stock and are available in various sizes.
These collars come in many sizes and are ideal for use with standard round shafts. They are easy to install and disassemble and feature a high clamping power. They are also available in custom designs and materials. Set-screw shaft collars are available for use in various industries.
The company manufactures a variety of collars, including steel, zinc plated steel, and stainless steel. They also offer custom and adjustable collars. These collars are used in a variety of industries, including the food, chemical, pulp and paper, and wood industries. They are available with a variety of screw threads.
The screw and shaft material relationship must be compatible to ensure a secure fit. In addition, the shaft material should be softer than the screw material. For this reason, set-screw shaft collars are most effective when the shaft is made from softer material. Some setscrew shaft collars feature forged socket set screws to increase their holding power and torque capacity. Additionally, forged stainless steel set screws also increase their performance and hardness.
Shaft collars can be used on machines and transmission applications. They can be adjusted with a set screw or grub screw. In addition to setting the collar into place, a screw driver can also be used to adjust the grip on the collar. This type of shaft collar is often used in manufacturing applications.
Clamp-type collars are another type of shaft collars. These types allow the shaft to rotate and are used for mounting sensors and fixtures. These collars can be found in one-piece or two-piece styles. They can also be used in harsh environments.
Shaft Collar

Single split shaft collars

Single split shaft collars are used in many applications to protect the shaft from wear and tear. They are easy to install and disassemble, reducing downtime and labor costs. These collars utilize full seating torque of the set screws to apply equal force distribution around the shaft's circumference, providing stronger holding power.
These shaft collars are available in a variety of materials. They are typically made from different types of steel, including stainless, alloyed steel, nylon, and aluminum. Some are even available in custom sizes. In addition to standard sizes, single split shaft collars also come in a variety of finishes, including black oxide and chrome.
Single split shaft collars come in metric and imperial sizes. They can be made of various materials, including zinc and lead-free steel. These collars are available with a black oxide finish for extra corrosion resistance. They are also available in 303 and 316 stainless steel. They can also be made from engineered plastics.
Single split shaft collars are the most popular style of shaft collars. They are easy to install and disassemble. They provide a tight fit and superior holding power over solid shaft collars. They are also easier to replace and can be used on a variety of shafts. In addition, single split shaft collars are easy to remove and adjust.
Single split shaft collars are available in a variety of bore sizes. They can fit shaft diameters from 1/8" to four fifteen/16". Ideally, the material used should be softer than the set screw. You can also choose between non-plated and chrome-plated collars. These collars are available in metric or imperial measurements.
Single split shaft collars are one-piece or two-piece designs. Single-piece shaft collars feature one screw and two-piece collars have two. They are easier to install than single-piece shaft collars and are suitable for lighter duty applications. Single split shaft collars are available in a variety of threaded bore sizes.
Single split shaft collars have a wide range of uses in industrial settings. They can secure bearings on shafts or locate components in motor assemblies. They can also function as mechanical stops. RS PRO offers a wide selection of shaft collars that meet and exceed industry standards.
China Semi-Automatic LPG Cylinder Handle Welding Machine Made in China     bearing shaft collarChina Semi-Automatic LPG Cylinder Handle Welding Machine Made in China     bearing shaft collar
editor by czh 2023-01-03

finde uns

Ever-power Schaftkragen Co., Ltd.

Mail: [email protected]

Als einer der führenden Hersteller, Lieferanten und Exporteure von mechanischen Produkten in China, bieten wir Reduzierstücke, Kettenräder, Industrie- und Förderketten, Riemen, Riemenscheiben, Zahnräder, Zahnstangen, Getriebe, Motoren, PTO-Wellen, Taper Lock Bushing, Vakuumpumpen, Schraubenluft Kompressoren und viele andere Produkte. Bitte kontaktieren Sie uns für Details.

Std:
Montag bis Freitag: 9.00 bis 18.00 Uhr
Samstag und Sonntag: 10:00 - 16:00 Uhr

Recent Posts